TINMORRY PC-GF Glass Fiber 3D Printer Filament 1.75mm, 1 KG, Carter Yellow | Glass Fiber Reinforced PC, High Heat Resistance, High Strength & Impact Resistance, Functional Parts, Prototypes
Compare every TINMORRY PC-GF listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Much Stiffer and Warping Resistant: With the reinforcement of glass fiber, TINMORRY PC-GF has significantly higher stiffness and warping resistance than Generic PC, which makes the prints more resistant to deformation during both printing and use.
- Ultra-high Layer Adhesion: TINMORRY PC-GF can make the prints have ultra-high layer adhesion, which makes up for the shortcoming of most filaments and ensures that the products are not easy to break when subjected to forces in all directions.
- High-Speed Printing: TINMORRY PC-GF is specially designed and can be printed at high speeds. At 285 °C nozzle temperature, its max printing speed can reach 200 mm/s (common 0.4 mm hardened steel nozzle)
- Delicate Surface, Engineering Level and Durable: The presence of glass fiber makes the models made of TINMORRY PC-GF look slightly frosted and have invisible layer lines, which makes them delicate, fine and dimensionally accurate. In addition, TINMORRY PC-GF has excellent durability and resistance to oil , grease, water, wear, and heat: HDT reaches 107 °C (0.45 MPa), so it can be used to print aesthetic models and mechanical parts that need to come into contact with hot water, grease and etc.
- Tips: 1. Recommend Nozzle Temp 275-295℃, Bed Temp: 100-110℃ , Print Speed: <200mm/s. 2. Please use wear-resistant steel nozzles ( 0.6 mm is recommended, 0.4mm Capable) instead of ordinary brass nozzles! 3. Dry before use for the highest print quality (80-90 °C, 6-8 h). Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant). 4.If you have any questions while using TINMORRY filament, please contact us to get filament profile or download from GitHub.
From the listing on Amazon.
View our other TINMORRY listings here.
View our other PC-GF listings here.
Keep your filament dry, view our gear here.
Printing TINMORRY PC-GF
TINMORRY PC-GF in Yellow is PC filled with chopped glass fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain PC, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). Few makers publish separate PC-GF settings, so the ranges below are for plain PC; expect to print toward the top of them. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our Polycarbonate (PC) filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Glass fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our glass fiber filament guide and nozzle types guide.