Inslogic PA6-GF25 Filament 1.75mm, 250g Refill Glass Fiber Reinforced Nylon Filament, Tough & Heat-Resistant, HDT 21°C, for Functional Parts (Black)

Product Details

• 【Handles the Heat】With a heat deflection temperature of 210°C, Inslogic PA6-GF25 Nylon filament stays solid under stress, outperforming standard nylon in high-temp and high-load environments.
• 【Stiff, Strong, and Stable】Reinforced with 25% glass fiber, Inslogic PA6-GF25 prints with high rigidity and low warping. Delivers crack-resistant parts with excellent dimensional accuracy.
• 【Engineered for Tough Jobs】Built for demanding applications with 125 MPa tensile strength, 9.4 KJ/m² notched impact strength, and 17% elongation at break. Strong, durable, and dependable.
• 【Ready to Print, Right Out of the Box】Each spool is pre-dried at 110°C for 4 hours and vacuum sealed to prevent moisture issues like bubbling, stringing, or poor adhesion.
• 【Optimized for High-Temp FDM Printers】Prints smoothly at 270–290°C using hardened nozzles and PEI beds. Compatible with Voron, Bambu Lab, Prusa MK4, and similar high-performance setups.
• 【Vacuum-Sealed for Moisture Protection】The filament is dried and packed in 100% vacuum-sealed bags to prevent moisture, ensuring optimal printing performance.

From the listing on Amazon.

View our other Inslogic listings here.

View our other Nylon-GF listings here.

Keep your filament dry, view our gear here.

Printing Inslogic Nylon-GF

Inslogic Nylon-GF in Black runs on the standard Nylon-GF profile below, and this listing is a 0.25kg spool. Nylon-GF is best suited to tough, wear-resistant mechanical parts like gears, hinges, and high-heat brackets. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Settings sourced from our Nylon filament guide. Read it for bed adhesion, drying, troubleshooting, and material-specific tips.