Epelay PLA+ 3D Printer Filament 2kg, White, 2Pack
Compare all 2 Epelay PLA+ 2kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【White PLA+ 2-Pack for Everyday Printing】 Includes 2 spools of Epelay White PLA+ 1.75mm filament, ideal for prototypes, models, functional parts, decor, and everyday projects. Two full spools provide more filament for larger prints, batch projects, and frequent printing.
- 【Tough PLA+ & Smooth Printing】 Enhanced toughness and strong layer adhesion provide added durability while maintaining easy printability. Low shrinkage and minimal warping help deliver clean first layers and smooth, reliable prints.
- 【±0.02mm Precision & Neatly Wound】 Consistent 1.75mm diameter with ±0.02mm tolerance supports steady extrusion and even layers. Precision winding helps reduce tangles, knots, and feeding interruptions during printing.
- 【Dried & Vacuum Sealed】 Each spool is thoroughly dried and individually vacuum sealed to help protect against moisture, reducing bubbles, nozzle clogging, and inconsistent extrusion for more reliable prints.
- 【Up to 300mm/s & Wide Compatibility】 Supports 50–300mm/s print speeds and works with most FDM 3D printers using 1.75mm PLA+ filament. Recommended: 200–230°C nozzle and 55–65°C bed; pre-dry at 50°C for 6–8 hours for optimal results.
From the listing on Amazon.
View our other Epelay listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing Epelay PLA Plus
Epelay PLA Plus in White runs on the PLA Plus profile below, and this listing is a 2kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.