Inslogic Pre-Dried ABS-GF10 Glass Fiber ABS Filament 1.75mm, 1KG Natural
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【High Strength & Rigidity +30%】10% glass fiber ABS boosts tensile and flexural strength while staying easy to print, perfect for mechanical parts, jigs, and brackets.
- 【Heat-Stable ABS 104°C HDT】Balanced heat transfer prevents softening or warping, keeping parts stable under high-temperature conditions like automotive components and lamp housings.
- 【Low-Warp & Stable Performance】Optimized glass fiber and resin balance minimize shrinkage, delivering stable results even in less controlled environments.
- 【Smooth & Detailed Surface Finish】Uniform glass fiber dispersion creates flatter, finer surfaces, revealing every detail in display models and functional prototypes.
- 【Excellent High-Speed Printing Compatibility】High-flow formulation and stable extrusion enable smooth printing at 50–100 mm/s on Bambu, Prusa, and Creality K-series.
- 【High Toughness & Strong Layer Bonding】ABS retains ductility and strong layer adhesion even with glass fiber, producing durable, impact- and delamination-resistant parts.
- 【Versatile Applications】 Suitable for structural components, fixtures, tooling, and functional prototypes that demand reliability and durability.
- 【Removable & Spool-Compatible】 Removable spool fits Sunlu, Bambu, and other standard spools for easy swapping and use.
- 【Vacuum-Sealed Pre-Dried Filament】Inslogic filament is pre-dried for 3–6 hours and vacuum-packed to ensure dryness and reliable, consistent printing.
- 【After-Sales Support】Inslogic provides comprehensive after-sales service and expert technical support. Contact us anytime with any questions.
From the listing on Amazon.
View our other Inslogic listings here.
View our other ABS-GF listings here.
Keep your filament dry, view our gear here.
Printing Inslogic ABS-GF
Inslogic ABS-GF in Natural is ABS filled with chopped glass fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain ABS, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for ABS-GF, which usually prints a little hotter than plain ABS. ABS-GF is best suited to stiff, heat-resistant parts with less warping than plain ABS. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab data. Heat resistance is the heat deflection temperature (HDT). Read our glass fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Glass fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our glass fiber filament guide and nozzle types guide.