CHCKX PETG 3D Printer Filament 1.75mm, +/-0.02mm Tolerance, 1kg Spool(2.2lbs), for Most 3D Printers,Orange
Compare all 17 CHCKX PETG 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Transparency and stability:The surface of the CHCKX PETG Filament has good gloss, the layer lines are seamless, and invisible, it is not easy to absorb moisture, the stability is good, and it is hard to produce cracks.
- Strong impact resistance: With outstanding toughness and high resistance, CHCKX PETG Filament combines the good mechanical properties of ABS with high toughness. At the same time, it has good printing performance that PLA is easy to use and not easy to warp.
- No edge warping, fluidity and smooth discharge: High-precision printing, high translucency, no edge warping, no clogs, no bubbles.
- PETG Filament Setting Recommendations: Printing temperature 240-260℃, Build plate temperature 70-80℃。
- Excellent service: CHCKX is a customer-centric company, we have been committed to providing customers with good service, if you have any questions, please do not hesitate to contact us at any time, we will try our best to solve your problems.
From the listing on Amazon.
View our other CHCKX listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing CHCKX PETG
CHCKX PETG in Orange runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.