Bambu Lab PLA Silk+ - 1 kg 3D Filament 1.75 mm, Silk Look, Tolerance ±0.03 mm, RFID and Compatible with AMS/AMS Lite - Easy to Print - Blue (13604)
Compare all 22 Bambu Lab PLA Silk 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- SILKY SHEEN WITHOUT POST-PROCESSING: Glossy, silky-shimmer surface directly from the printer, for vases, figures, decor and gifts with an elegant, metallic look
- STRONGER THAN CLASSIC SILK PLA: developed for high strength, improved layer adhesion, flexural strength 75 MPa, tensile strength 33 MPa, impact strength 18.5 kJ/m², prints hold up in everyday use
- EASY TO PRINT: Nozzle 210 to 240 °C, print bed 35 to 45 °C with adhesive stick, up to 250 mm/s, for open and closed printers, outer wall at 50 mm/s for maximum gloss
- 13 bright colours: from light pearl and pastel tones to warm metallic tones to bold candy colours, four colours also available as a refill for the Bambu reusable spool
- RFID AND AMS COMPATIBLE: Print parameters in the RFID tag, compatible with AMS and AMS lite, 1.75 mm +/- 0.03 mm, 1 kg net, with spool or as refill for the Bambu Reusable Spool
From the listing on Amazon.
View our other Bambu Lab listings here.
View our other PLA listings here.
Keep your filament dry, view our gear here.
Printing Bambu Lab PLA
Bambu Lab PLA in Silk Blue runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.