SUNLU Light Weight PLA Filament 1.75mm, White | 0.8KG, LW-PLA 350m Low-Density, Active Foaming, For RC Planes Drone Parts and Cosplay, Suit Most 3D Printers
Compare all 2 SUNLU PLA 800g listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【0.8KG Light weight PLA】SUNLU lightweight PLA is 350m long and weight 0.8KG, while the length of a regular 1KG PLA filament is only 330m. Therefore, when printing models of the same size, models printed using PLA LW filaments will be lighter.
- 【Foaming Process】The density of SUNLU lightweight PLA filament is relatively low, 0.84g/cm ³, while the density of standard PLA is 1.25g/cm ³. The foaming expansion of SUNLU LW PLA filament allows you to print more with less material.
- 【Matte Finish & Easy to Paint】SUNLU PLA-LW lighweight PLA filament is matte finish, which is very easy to paint and has a strong adhesion of surface paint. Improved paint adhesion will not limit your creativity.
- 【Easy to Paint】 Compared to other brands of LW PLA, the SUNLU lightweight PLA is beginner-friendly, simple to use, and requires no parameter adjustments.
- Printing Settings: Nozzle: 190°C-210°C, Bed: 50°C-60°C, Speed: 30-50mm/s.
- 【Perfect Material for Aircraft】: The expansion performance of LW PLA filament gives it excellent layer adhesion, better drop resistance, and repairability. Combining low-density characteristics, this filament is the perfect choice for aircraft and drone parts, as well as role-playing models.
From the listing on Amazon.
View our other SUNLU listings here.
View our other PLA listings here.
Keep your filament dry, view our gear here.
Printing SUNLU PLA
SUNLU PLA in White runs on the PLA profile below, and this listing is a 0.8kg spool. PLA is best suited to light parts such as RC aircraft, cosplay props and large display pieces. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against colorFabb, Polymaker and Bambu Lab data. Heat resistance is the heat deflection temperature (HDT). Read our LW-PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.