Polymaker Fiberon PA612-ESD 3D Printer Filament Nylon, Black, 1.75mm, 3kg

Product Details

• STATIC-DISSIPATIVE PA612 NYLON: Carbon nanotube and 10% carbon fiber reinforced nylon developed for PCB assembly fixtures, electronics housings, component trays, storage racks, production tooling, and other functional parts used in ESD-controlled work areas.
• CONTROLLED ELECTROSTATIC DISSIPATION: Printed-part surface resistivity typically falls within approximately 10⁴–10⁷ Ω/sq and may vary with nozzle temperature, print orientation, part geometry, moisture, and surface condition. This material is not intended to function as a current-carrying conductor. Test finished parts for specification-controlled applications.
• MECHANICAL AND THERMAL PERFORMANCE: Dry XY tensile strength reaches 84.3 MPa. After annealing at 100°C for 16 hours, printed test specimens reach an HDT of 157°C at 0.45 MPa and 125.4°C at 1.8 MPa. These test results should not be interpreted as continuous-use temperature ratings.
• PRINTING REQUIREMENTS: Print at 280–300°C with a 40–50°C build plate and the cooling fan turned off. Use an all-metal hotend capable of reaching at least 280°C and a hardened steel, ruby, or other wear-resistant nozzle. No heated chamber is required. Speeds up to 300 mm/s may be achievable after temperature, flow, and motion calibration.
• DRYING AND PART ORIENTATION: Store the filament sealed and dry. After moisture exposure, dry at 100°C for 10 hours before printing. Anneal printed parts at 100°C for 16 hours when enhanced thermal performance is required. For load-bearing parts, align the primary load with the XY plane and verify layer adhesion, dimensions, and final-part performance.

From the listing on Amazon.

View our other Polymaker listings here.

View our other Nylon listings here.

Keep your filament dry, view our gear here.

Printing Polymaker Nylon

Polymaker Nylon in Black runs on the standard Nylon profile below, and this listing is a 3kg spool. Nylon is best suited to tough, wear-resistant mechanical parts like gears, hinges, and high-heat brackets. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Settings sourced from our Nylon filament guide. Read it for bed adhesion, drying, troubleshooting, and material-specific tips.