3D-Fuel Standard PLA+ Filament 1.75mm 4kg Spool, Fluorescent Yellow | Easy-Printing PLA+, 100% Virgin NatureWorks Resin, 4kg Spool for Long Prints, Made in USA
Compare all 12 3D-Fuel PLA+ 4kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- EASY, RELIABLE EVERYDAY PLA: Standard PLA+ is our go-to PLA for prototypes, models, display pieces, organizers, cosplay and multi-color prints. It prints smoothly with a glossy finish and barely any smell, and it is safe to print indoors under normal use.
- PRINT SETTINGS THAT WORK: 220-250°C nozzle (start at 240°C on fast modern printers, 230°C on slower ones) and 0-60°C bed, 60°C recommended. Runs from 60 to 250 mm/s. Generic PLA profiles at 200-215°C run too cold. Free tested profiles for Bambu Lab printers and the Snapmaker U1, and built into PrusaSlicer. Fluorescent colors are brightest under UV light.
- 100% VIRGIN NATUREWORKS INGEO 4043D: No fillers or stretchers, and diameter is laser measured and held to +/- 0.02 mm for consistent extrusion. Need more? Tough Pro PLA+ is 8.8x tougher in our drop test, and Pro PCTG handles outdoor and high-heat parts.
- 4KG SPOOL FOR LONG RUNS: Fewer spool changes for print farms and big jobs, vacuum sealed with desiccant. Stored sealed and dry, it keeps for years. If a spool has been open a while, dry it at 50°C for 6-8 hours.
- MADE IN FARGO, NORTH DAKOTA, USA: Extruded in our own factory and available in a wide range of colors. 3D-Fuel publishes print profiles, guides and data sheets for every material, and real people answer support questions.
From the listing on Amazon.
View our other 3D-Fuel listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing 3D-Fuel PLA Plus
3D-Fuel PLA Plus in Yellow runs on the PLA Plus profile below, and this listing is a 4kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.