TINMORRY Marble PETG Filament 1.75mm, 1 KG, Marble Magic Purple

Product Details

• Tips: 1. Dry before use for the highest print quality (65 °C, 8 h). Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant). 2. Nozzle temperature 225-250 °C, hotbed 75-90 °C. It is recommended to use wear-resistant steel nozzles (0.6 mm recommended, 0.4mm capable). If your 3D printer is Bambu X1 or P1P, please set the nozzle temperature to 250°C. 3. To make sure the first layer has good adhesion, it is recommended to turn off the cooling fan from the 1st to the 3rd layer.
• Premium Marble Surface: TINMORRY marble PETG 3d printing filament has a marble-like premium surface effect, especially suitable for printing models with high demands on appearance.
• Good Toughness and Heat Resistance: TINMORRY PETG-Eco 3D Printer Filament has the advantages of high toughness, low shrinkage, and superb layer bonding. It's a good choice when PLA can‘t meet your printing needs and ABS is difficult to print.
• Compatibility and High-Speed Printing: Support high-speed printing; the printing speed can reach 300 mm/s, which is 3-5 times faster than other brands of PETG filaments. Perfectly compatible with Bambu FDM 3D printers. If you have any questions while using TINMORRY filament, please contact us to get filament profile or download from GitHub.
• Less Prone to Tangling and Clogging: With a diameter of 1.75±0.03mm, TINMORRY PETG-Eco filament is completely mechanically wound and strictly inspected manually to ensure clean winding and easy feeding. The new formula also significantly improves print quality by reducing nozzle clogging and clumping compared to other brands of PETG.

From the listing on Amazon.

View our other TINMORRY listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing TINMORRY PETG

TINMORRY PETG in Purple runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.