iBOSS Gradient PLA Plus 3D Printer Filament 1.75mm+/-0.02mm, 1kg Spool (2 2lbs) Transparent Tri Color 3D Printing Filament, PLA Pro 3D Filament,Fit Most FDM Printer(Transparent Red Blue Green)
Compare all 12 iBOSS PLA+ Transparent 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 💦【Gradient Filament】---iBOSS Gradient Multicolor PLA PLUS Filament Features 2-3 colors, Transparent Gradient Filament with a 8 meter gradient, Silk Gradient Filament with a 12 meter gradient, Creating stunning and beautiful prints.
- 📏【Dimensional Accuracy & Consistency】---iBOSS PLA PLUS Filament Print Temperature: 200 - 220℃, Recommended Temp:210℃. Printing Speed: 40-130mm/s, iBOSS PLA+ Filament dimensional: 1.75mm,accuracy +/- 0.02mm.
- 🧵【Tangle Free & Bubble-Free & Clog-Free】--- Our 3D Printing Filaments are easy-to-use.Total Length: 340-350m.Melt well, feed smoothly and constantly without clogging the nozzle or extruder.Full mechanical winding and strict manual examination,to make sure the line tidy and no-tangle.
- 📦【Vacuumed Sealed Packaging】--- Net Weight: 1KG. iBOSS PLA+ filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
- 🛠️【Wide Compatibility and Color Selection】--- iBOSS filaments seamlessly integrates with most 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations.
From the listing on Amazon.
View our other iBOSS listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing iBOSS PLA Plus
iBOSS PLA Plus in Transparent Green runs on the PLA Plus profile below, and this listing is a 1kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.