colorFabb LW-PLA Yellow 3D Printer Filament, 1.75mm Diameter, 750g Spool, Lightweight Material, Ideal for RC Planes, Matte Finish

Product Details

• Experience a breakthrough in lightweight 3D printing with ColorFabb LW-PLA. This filament expands during extrusion, reducing weight by up to 65% without sacrificing strength. Perfect for RC planes, drones, cosplay props, and any project that benefits from reduced mass. Print effortlessly with stable layer adhesion and low stringing. For best results, start at 230–250°C and adjust flow to achieve the desired foaming effect. Lower flow equals lighter parts. With LW-PLA, you print stronger, lighter, and smarter — optimizing your designs for true performance.
• Take full control over your print density using ColorFabb LW-PLA’s unique foaming behavior. By tuning temperature and flow, you can create lightweight or solid parts from the same spool. This makes it ideal for functional prototypes, model aircraft, and engineering applications. Enjoy reduced filament usage and shorter print times while maintaining precise details. For the best surface finish, enable retraction and reduce travel moves. LW-PLA empowers every maker to achieve professional, high-efficiency prints with precision and reliability.
• Material: LW-PLA (Lightweight PLA) Diameter tolerance: ±0.05 mm Glass transition temp: 60°C Recommended nozzle temp: 230–250°C Bed temp: 50–60°C Print speed: 35–55 mm/s Density reduction: Up to 65% For best results, dry filament before printing and store in a sealed container. Adjust flow rate between 60–100% to fine-tune weight and surface finish. LW-PLA delivers reliable extrusion, smooth layers, and stunning lightweight results for any creative or functional project.

From the listing on Amazon.

View our other ColorFabb listings here.

View our other PLA listings here.

Keep your filament dry, view our gear here.

Printing ColorFabb PLA

ColorFabb PLA in Matte Yellow runs on the standard PLA profile below, and this listing is a 0.75kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Settings sourced from our PLA filament guide. Read it for bed adhesion, drying, troubleshooting, and material-specific tips.