CCTREE PLA+ Filament 1.75mm, 1KG Cardboard Spool (2.2 lbs), Grey | Stronger and Toughness, Easy Print 3D Printing Filament PLA Plus, Accuracy +/- 0.03 mm, Fit Most FDM 3D Printers
Compare all 4 CCTREE PLA+ 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【Higher Toughness & Impact Strength】CCTREE PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness and is not easy to break. low shrinkage, no deformation, no cracking, and high printing precision.
- 【High Dimensional Accuracy & Consistency】Advanced manufacturing ensures 1.75mm PLA filament with a tolerance of ±0.03mm, minimizing nozzle jams and delivering smooth, consistent extrusion.
- 【High Compatibility】CCTREE PLA+ Filament Supported all mainstream fdm 3d printers, Meet the demands for high-speed printers. Continues consistently outstanding performance at high speeds. Complete dried before packing and well vacuum sealed to protect the filaments from moisture and dust, without clogging and bubbling.
- 【PLA+ Recommend Settings】To achieve the best printing results with CCTREE PLA filament, we recommend printing at a nozzle temperature of 195-220°C, a bed temperature of 50-65°C, printing speed of 50-105mm/s, suitable for 300mm/s high-speed printing.
- 【Wide Compatibility】Works perfectly with most FDM 3D printers and 3D pens using 1.75mm filament, If you have any product quality problems, don't hesitate to contact us, we hope to solve your problem within 24 hours.
From the listing on Amazon.
View our other CCTREE listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing CCTREE PLA Plus
CCTREE PLA Plus in Grey runs on the PLA Plus profile below, and this listing is a 1kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.