iBOSS PLA Plus (PLA+) 3D Printer Filament 1.75mm,1kg Spool (2.2lbs) Toughness Enhanced 3D Printing Filament,Dimensional Accuracy +/- 0.02mm,1.75mm PLA Plus Filament,Fit Most FDM Printer(Black)
Compare all 16 iBOSS PLA+ 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 🌟【PLA+ Filament Advantages】--- PLA+ 3D Printer Filament is improved and upgraded based on PLA filament,good adhesion performance ,high strength and better toughness.Clog/Bubble/Tangle/Warping/Stringing free, high durability, better layer adhesion.iBOSS filaments are made with virgin materials, no pollution, non-toxic and no odor during the printing.
- 📏【Dimensional Accuracy & Consistency】--- iBOSS 3D Printer PLA Plus filament of 1.75mm diameter, Minimum tolerance and low warping to ensure consistent feeding and stable prints.Dimensional accuracy + / - 0.02 mm ; 1 kg spool (2.2lbs), which making filament that have an outstanding surface finish and are highly precise.
- 🧵【Tangle Free & Bubble-Free & Clog-Free】--- Our 3D Printing Filaments are easy-to-use.Total Length: 340-350m.Recommended Print Temperature:200-220℃.Melt well, feed smoothly and constantly without clogging the nozzle or extruder.Full mechanical winding and strict manual examination,to make sure the line tidy and no-tangle.
- 📦【Vacuumed Sealed Packaging】--- Net Weight: 1KG. iBOSS PLA+ filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
- 🛠️【Wide Compatibility and Color Selection】--- iBOSS filaments seamlessly integrates with most 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations.
From the listing on Amazon.
View our other iBOSS listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing iBOSS PLA Plus
iBOSS PLA Plus in Black runs on the PLA Plus profile below, and this listing is a 1kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.