Stronghero3D PLA Filament 1.75mm Rainbow,Multicolor,Silk PLA 3D Printer Filament,Net Weight 1kg(2.2lbs) Accuracy +/-0.05mm

Product Details

• PLA silk rainbow 1.75mm, automatic color change in single extruder, 5 colors, purple red, red, yellow, green, blue and colors between them, 15 meters each color;
• High-quality PLA rainbow, manual color change, color change red, orange, yellow, green, blue, purple and transition colors between the two colors, theoretically each color lasts 5-9 meters in length , can be used in all kinds of FDM 3D printers, director extrusion or Bowden extruder. Printing smoothly, no jam, no warp, no cracking, no bad smell.
• It is suggested that the nozzle should be used at a temperature of 200-245 ℃. If hairy when printing, adjusted gradually by 5-10 ℃ each time. The platform can be glass, acrylic plate or PEI sheet, heat bed temp 50-70 ℃

From the listing on Amazon.

View our other Stronghero3D listings here.

View our other PLA listings here.

Keep your filament dry, view our gear here.

Printing Stronghero3D PLA

Stronghero3D PLA in Silk Rainbow runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.