HELLO3D Rainbow Glow in the Dark PLA Filament 1.75mm 1KG, Multicolor, FDM | 3D Printer Filament, Glows in Rainbow Colors at Night, Fits All FDM Printers, Night Lights, Holiday Decor
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- GLOWS IN RAINBOW COLORS: Phosphorescent PLA charges under daylight, or 30 minutes under a UV lamp for the strongest glow - then shifts through pink, blue, green and more as it prints, each color glowing its own shade after dark.
- A NEW COLOR EVERY 10 METERS: Colors transition roughly every 10 meters along the spool, so one print sweeps through several glow shades - vases show color bands, figurines pick up mixed shades, and no two prints come out the same.
- PRINT-READY SPECS: 1.75mm with 0.02mm tolerance, 1kg (2.2lb) spool; nozzle 190-215C, bed 35-55C, 50-150mm/s; works on all FDM 3D printers and most 3D pens.
- PRINT-READY SPECS: 1.75mm with 0.02mm tolerance, 1kg (2.2lb) spool; nozzle 190-215C, bed 35-55C, 50-150mm/s; works on all FDM 3D printers and most 3D pens.
- GLOW CARE: Prints need light to charge and will not glow in total darkness; long-term direct sunlight weakens the glow over time. Not for load-bearing parts.
From the listing on Amazon.
View our other HELLO3D listings here.
View our other PLA listings here.
Keep your filament dry, view our gear here.
Printing HELLO3D PLA
HELLO3D PLA in Glow Rainbow runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This listing includes glow-in-the-dark filament. The phosphorescent pigment that makes it glow is hard and wears brass nozzles quickly, even though the filament looks like ordinary plastic. Use hardened steel or another wear resistant nozzle, starting about 5 to 10°C hotter than with brass.
Based on Bambu Lab, Polymaker and eSUN guidance. More in our nozzle types guide.