FILAGALAXY PLA++ 1.75mm, PLA+ 3D Printer Filament, 1kg Spool, Copper | PLA++ = PLA Plus base upgraded with MagnoCal and StearaShield, +/- 0.02 mm tolerance, high-speed ready, vacuum sealed
Compare every FILAGALAXY PLA Plus listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- PLA++ HIGH-SPEED FORMULA: High-flow PLA+ base for stable extrusion from 40 to 300 mm/s; suits fast CoreXY printers and standard bed-slingers alike; recommended nozzle 190-220°C, bed 50°C, no glue needed on most build plates
- MAGNOCAL + STEARASHIELD: Two in-house additives in every spool; MagnoCal mineral system supports strength and a clean surface, StearaShield lubricant cuts nozzle friction to help lower clog risk; tougher, less brittle than regular PLA
- +/- 0.02 MM TOLERANCE: In-line Zumbach laser gauge monitors diameter during production for consistent 1.75 mm filament; steady, even flow helps reduce under-extrusion, layer gaps and nozzle clogs on long prints
- DRIED AND VACUUM SEALED: Each spool is dried for 24 hours before packing, then sealed in a vacuum bag with desiccant to keep moisture out; helps reduce bubbles, popping and stringing straight out of the box
- TANGLE-FREE 1 KG SPOOL: 1 kg (2.2 lb) of filament machine wound and hand inspected on a cardboard spool; works with most 1.75 mm FDM 3D printers, including Bambu Lab, Creality, Prusa and Elegoo models
From the listing on Amazon.
View our other FILAGALAXY listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing FILAGALAXY PLA Plus
FILAGALAXY PLA Plus in Copper runs on the PLA Plus profile below, and this listing is a 1kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.