Officeflow PLA+ 3D Printer Filament 1.75mm Blue,1kg/2.2lbs Spool | High Toughness PLA Plus, ±0.02mm Dimensional Accuracy, Tangle-Free, Easy to Print for Most FDM 3D Printers
Compare every Officeflow PLA Plus listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- NATURAL WOOD TEXTURE — Officeflow PLA Wood filament blends PLA with wood fibers to create prints with a warm, matte wood-like appearance and subtle grain texture, with visible wood fiber specks. Layer lines blend naturally into the surface, giving models a handcrafted look without post-processing
- SANDABLE & PAINTABLE — The wood-fiber surface can be lightly sanded, stained, or painted to enhance the grain effect. Ideal for decorative objects, architectural models, planters, figurines, and home décor pieces that mimic real wood
- ±0.02MM DIAMETER CONSISTENCY — Each spool is produced with strict diameter control at 1.75mm for smooth, steady extrusion. Neatly wound layering ensures the filament feeds cleanly from start to finish with fewer snags and jams
- EASY TO PRINT — Recommended nozzle temperature: 190–220°C, bed temperature: 55–65°C. Because wood fibers are slightly abrasive, we recommend using a hardened steel or ruby nozzle for extended printing sessions to reduce wear
- VACUUM-SEALED WITH DESICCANT — Each 1kg spool ships in a moisture-proof bag with desiccant so the wood-fiber filament stays dry and print-ready between uses
From the listing on Amazon.
View our other Officeflow listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing Officeflow PLA Plus
Officeflow PLA Plus in Blue runs on the PLA Plus profile below, and this listing is a 1kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.