FILJSTMBES Gradient PLA+ Filament 1.75mm, 4 Gradient Colors, 4 x 250g
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 4 BOLD GRADIENT COLORS: Explore four nature-inspired colorways — Wind, Forest, Fire and Mountain. Each 250g spool creates smooth, evolving color transitions that add depth and personality to models, décor, toys, crafts and creative prints.
- ENHANCED PLA+ TOUGHNESS: Upgraded PLA+ formula delivers an unnotched impact strength of 18 kJ/m², adding durability for prints that are handled, assembled or used regularly while maintaining smooth and consistent printability.
- HIGH-SPEED & PRECISE PRINTING: Supports print speeds up to 300mm/s with a consistent 1.75mm diameter and ±0.02mm dimensional accuracy for stable extrusion and smooth layer deposition. Recommended nozzle temperature: 190–230°C.
- SMOOTH, RELIABLE FEEDING: Neatly machine-wound filament helps prevent tangles and feeding interruptions, while consistent material flow helps reduce clogging. Low shrinkage and stable first-layer adhesion help minimize warping and edge lifting on larger prints.
- QUALITY MATERIAL & TESTED COMPLIANCE: Made with 100% virgin resin with no recycled scrap for consistent material quality. Tested for compliance with RoHS, REACH and VOC requirements. Compatible with most 1.75mm FDM/FFF 3D printers; recommended bed temperature: 35–65°C.
From the listing on Amazon.
View our other filjstmbes listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing filjstmbes PLA Plus
filjstmbes PLA Plus in Green runs on the PLA Plus profile below, and this listing is a 1kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.