CCTREE Glow in the Dark PLA+ Filament 1.75mm, Glow Blue | Easy Print 3D Printing Filament PLA Plus, 1KG Cardboard Spool(2.2 lbs), Accuracy +/- 0.03 mm, Fit Most FDM 3D Printers
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【Glow in the dark PLA Filament 】 Experience the mesmerizing glow with CCTREE Glow 3D Printer Filament. The radiant glow provides a stunning visual effect, perfect for enhancing your 3D printed creations. The self-illuminating properties of this filament offer a long-lasting glow effect after absorbing light energy, ensuring your prints continue to shine brightly at night. Please note that the absorption time should not be too short
- 【Higher Toughness】CCTREE PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness and is not easy to break. low shrinkage, no deformation, no cracking, and high printing precision
- 【High Dimensional Accuracy & Consistency】Advanced manufacturing ensures 1.75mm PLA filament with a tolerance of ±0.03mm, minimizing nozzle jams and delivering smooth, consistent extrusion
- 【PLA+ Recommend Settings】To achieve the best printing results with CCTREE PLA filament, we recommend printing at a nozzle temperature of 195-220°C, a bed temperature of 50-65°C, printing speed of 50-105mm/s
- 【Wide Compatibility】Works with most FDM 3D printers. If you have any product problems, don't hesitate to contact us
From the listing on Amazon.
View our other CCTREE listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing CCTREE PLA Plus
CCTREE PLA Plus in Glow Blue runs on the PLA Plus profile below, and this listing is a 1kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This listing includes glow-in-the-dark filament. The phosphorescent pigment that makes it glow is hard and wears brass nozzles quickly, even though the filament looks like ordinary plastic. Use hardened steel or another wear resistant nozzle, starting about 5 to 10°C hotter than with brass.
Based on Bambu Lab, Polymaker and eSUN guidance. More in our nozzle types guide.