SainSmart GT-3 High Speed PLA+ Filament 1.75mm, High Flow Glossy 3D Printer Filament, Silver, 2.2 LBS (1KG) Spool, Dimensional Accuracy +/- 0.04mm
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Lightning Fast: The GT-3 Hyper Speed filament is designed for high speed 3D printers to achieve an impressive fusion of rapid print speeds up to 500 mm/s and unparalleled print quality. Imagine giving your high-speed printer a turboboost for consistently amazing results!
- Smooth & Glossiness: PLA prints have smooth surfaces, especially when printed with fine layer heights. They have a slight sheen and a consistent surface texture, resulting in an attractive appearance.
- Easy-to-Remove Support: Detaching supports is a quick and easy process when using this filament. They can be taken off without damaging the model underneath, keeping all of its fine details intact.
- No Clogging or Jamming: This PLA+ filament has a softening temperature of 140°C, making it resistant to the cooling effects from the nozzle. This solves the obstruction issue.
- Compatibility: This filament, with its 1.75mm diameter, will work on a variety of 3D printers like Bamboo, Prusa, Creality, AnkerMake M5, QI DI, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc. For optimal results, we recommend a printing speed of around 30- 300 mm/s.
From the listing on Amazon.
View our other SainSmart listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing SainSmart PLA Plus
SainSmart PLA Plus in Silver runs on the PLA Plus profile below, and this listing is a 1kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.