TINMORRY PETG-CF Carbon Fiber PETG Filament 1.75mm, 1 KG, Blue | Carbon Fiber Reinforced, High Rigidity & Strength, Low Warping, Strong Z-Adhesion, High-Speed Printing, Wide Compatibility

Product Details

• Recommend printing temperature 240℃-270℃, build platform 75℃-90℃; 1st to 3rd layer, turn off cooling fan, If your 3D printer is Bambu P1P or X1, we recommend the nozzle temperature above 260 degrees.
• Tips: 1. Dry before use for the highest print quality (65 °C, 8 h). Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant). 2. Do not use conventional brass nozzles! As the filament contains real carbon fibers, you have to use wear-resistant steel nozzles (≥ 0.4 mm; 0.6 mm is better). 3. To get stronger Z-adhesion, please set a higher infill density and use an enclosed printer; lower the fan percentage to avoid overcooling. 4. Containing 15% professionally processed short-cut carbon fiber masterbatch (NOT carbon fiber powder). Be sure to wear protective equipment when you cut, sand, grind, or saw something made with CF/GF filaments, as carbon fiber dust will be created!
• Very easy to print with BAMBU FDM 3D printer, almost no warping. Lightweight and durable, suitable for applications requiring torsional, tensile, and impact strength. It is an ideal material for drone parts, racing models, and various functional parts.
• TINMORRY PETG-CF is a composite material consisting of PETG and 15% professionally processed short-cut carbon fiber masterbatch. The new exclusive formula greatly improved printing quality by reducing nozzle clogging and clumping compared to traditional PETG, and it also has a very good Z-adhesion.
• Compatibility and High-Speed Printing: Supports high-speed 3D printing and can print at a speed of 300 mm/s, 3-5 times faster than other brands of Petg-CF filament. Compatible with BAMBU LAB, Creality K1C, QIDI MAX3, FLASHFORGE Adventurer 5M, Prusa MK4, VORON, and AnkerMake M5C FDM 3D Printer. If your printer is from any other brand, please contact us to get the filament profile and technical support before use.

From the listing on Amazon.

View our other TINMORRY listings here.

View our other PETG-CF listings here.

Keep your filament dry, view our gear here.

Printing TINMORRY PETG-CF

TINMORRY PETG-CF in Blue is PETG filled with chopped carbon fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain PETG, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for PETG-CF, which usually prints a little hotter than plain PETG. PETG-CF is best suited to stiff functional parts such as jigs, fixtures and brackets that need PETG's chemical resistance. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our carbon fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.

Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.