ELEGOO ASA-CF Green 10kg
Compare all 6 ELEGOO ASA-CF 10kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
View our other ELEGOO listings here.
View our other ASA-CF listings here.
Keep your filament dry, view our gear here.
Printing ELEGOO ASA-CF
ELEGOO ASA-CF in Green is ASA filled with chopped carbon fiber, and this listing is a 10kg spool. The fibers make parts stiffer and more dimensionally stable than plain ASA, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). Few makers publish separate ASA-CF settings, so the ranges below are for plain ASA; expect to print toward the top of them. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our ABS & ASA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.