CCTREE PLA+ Filament 1.75mm, 1KG Cardboard Spool (2.2 lbs), Red

Product Details

• 【Higher Toughness & Impact Strength】CCTREE PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness and is not easy to break. low shrinkage, no deformation, no cracking, and high printing precision. It is made with raw starch materials derived from plant resources, bringing excellent results for printing functional parts or other projects.
• 【High Compatibility】CCTREE PLA+ Filament Supported all mainstream fdm 3d printers, Meet the demands for high-speed printers. Continues consistently outstanding performance at high speeds. Complete dried before packing and well vacuum sealed to protect the filaments from moisture and dust, without clogging and bubbling.
• 【PLA+ Recommend Settings】To achieve the best printing results with CCTREE PLA filament, we recommend printing at a nozzle temperature of 195-220°C, a bed temperature of 50-65°C, printing speed of 50-105mm/s, suitable for 300mm/s high-speed printing. Please adjust the printing parameters appropriately according to the printing situation.
• 【Tangle-Free & Neatly Wound & Consistency】CCTREE ensures that every PLA + filament is tightly and neatly wrapped by utilizing full mechanical winding, which minimizes tangles, filament snapping, and line breakage. CCTREE 3D printer filament dimensional Accuracy +/- 0.03mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, and less stringing.
• 【Risk-Free】If you have any product quality problems, don't hesitate to contact us, we hope to solve your problem within 24 hours. NOTE: Please pass the filament through the fixed hole to avoid tangles after use. Note: white is not pure white, and looks a cream-colored white, and blue-gray is a little blue.

From the listing on Amazon.

View our other CCTREE listings here.

View our other PLA Plus listings here.

Keep your filament dry, view our gear here.

Printing CCTREE PLA Plus

CCTREE PLA Plus in Red runs on the standard PLA Plus profile below, and this listing is a 1.00kg spool. PLA Plus is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Settings sourced from our PLA filament guide. Read it for bed adhesion, drying, troubleshooting, and material-specific tips.