Polymaker PC 3D Printing Filament 1.75mm, White, 1kg

Product Details

• Engineering Polycarbonate: Made with polycarbonate resin formulated for 3D printing, providing stiffness and heat resistance for functional prototypes, brackets, housings, jigs, and fixtures.
• Heat-Resistant Parts: The TDS lists a typical heat deflection temperature of 107°C at 1.8 MPa and 111°C at 0.45 MPa; actual results depend on part design and printing conditions.
• White Functional Finish: White filament provides a clean, neutral appearance for visible prototypes, mechanical components, equipment housings, and engineering models.
• High-Temperature Print Setup: Use a 245–270°C nozzle, 90–105°C build plate, cooling fan off, and 50–200 mm/s printing speed. An enclosed printer is required.
• Drying and Annealing: Dry at 75°C for 6 hours when needed and print from a dry box. Anneal at 90°C for 2 hours immediately after printing when residual-stress relief is required.

From the listing on Amazon.

View our other Polymaker listings here.

View our other PC listings here.

Keep your filament dry, view our gear here.

Printing Polymaker PC

Polymaker PC in White runs on the standard PC profile below, and this listing is a 1.00kg spool. PC is best suited to high-strength, heat-resistant engineering parts; PC-ABS/PC-GF/PC-CF blends print easier than pure PC at some cost to peak performance. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Settings sourced from our Polycarbonate (PC) filament guide. Read it for bed adhesion, drying, troubleshooting, and material-specific tips.